Panel upgrades
Electrical panel upgrades and replacements in Irvine
Make room for an EV charger, a remodel or new appliances, and replace worn or risky equipment. We size it right, pull the permit, coordinate with the utility, and get your power back on fast.
- Licensed C-10 · CSLB Lic. #1161594
- Permits & inspection handled
- Licensed C-10 Electrical ContractorCSLB Lic. #1161594
- You talk to Masonthe licensed owner, from the first call to the last
- Residential & commercialhomes, condos, offices, retail
- Permits handledwe pull them and meet the inspector
Signs your panel needs attention
- Breakers trip often, or feel warm to the touch
- No open spaces left for new circuits
- You're adding an EV charger, heat pump, hot tub, induction range or an ADU
- Your home still has a 100-amp (or smaller) service
- A home inspector flagged the panel
- It's a Federal Pacific (Stab-Lok), Zinsco or other older brand that inspectors and insurers often flag
- Rust, scorch marks, buzzing or a burning smell
- The panel is original to a home built in the 1960s or '70s
Panel and service work we handle
- Main panel replacements (same size, more spaces, modern breakers)
- Service upgrades (for example, 100 amps to 200 amps)
- Subpanels for garages, additions, ADUs and workshops
- Load calculations to find out what you actually need
- Breaker replacements and panel repairs
- Whole-home surge protection installed at the panel
- Solar-ready and battery-ready panel upgrades
- Meter and main breaker work coordinated with the utility
How a panel upgrade works
-
Assessment and load calculation.
We look at your panel, your service and what you plan to add (EV, AC, remodel) to recommend the right size. Sometimes that's not an upgrade at all.
-
Clear written quote.
What's included, what the utility needs to do, how long the power will be off, and the price.
-
Permit and utility coordination.
We pull the permit. If your service size is changing, we coordinate the disconnect and reconnect with Southern California Edison (or SDG&E in parts of south Orange County).
-
Installation day.
Most panel replacements are done in a day, with power off for part of it. We'll tell you the plan in advance so you can prepare.
-
Inspection and walkthrough.
We meet the inspector, label every breaker clearly and walk you through your new panel.
What affects the cost of a panel upgrade
You'll get a written quote that spells all of this out before any work begins.
- Panel replacement vs. service upgrade. Replacing a panel at the same amperage costs less than increasing your service size, which can involve utility work.
- Location and condition. Whether the panel is outside or recessed in a wall, and whether stucco or drywall needs to be opened.
- What has to be brought up to code. Grounding, bonding and surge protection requirements.
- Extras. Subpanels, new circuits or an EV charger added at the same time (often cheaper together than separately).
Panel upgrades in Irvine and Orange County
The City of Irvine offers fast online permitting for licensed contractors on many common electrical jobs, including panel upgrades, so the paperwork rarely holds a project up. Irvine is served by Southern California Edison. When an upgrade involves SCE, their scheduling is usually what sets the timeline, and we'll keep you updated at every step. Elsewhere in Orange County we work with each city's building department.
Common questions
How do I know if I need a 200-amp panel?
It depends on what you run and plan to add. A load calculation answers it properly. Many homes adding an EV charger don't need a bigger service, especially with smart load management. We'll tell you honestly.
Can I add an EV charger without upgrading my panel?
Often, yes. If your panel has capacity, a dedicated circuit is all you need. If it's close to its limit, an EV load-management device can let you charge without a full upgrade. See EV charger installation.
Are Federal Pacific and Zinsco panels really a problem?
Both are widely flagged by home inspectors and some insurers because of concerns about breakers that may not trip when they should. If you have one, have a licensed electrician look at it. Replacement is usually the recommendation.
How long will my power be off?
For a typical panel replacement, part of one day. If the utility needs to disconnect and reconnect your service, we schedule it so the outage is as short as possible and tell you the timing in advance.
Do you handle the permit and inspection?
Yes, every time it's required.
Find out what your panel can handle
Text a photo of your panel (door open, label visible) to (949) 424-2525 for a quick first opinion, or request an estimate.